17.08.23 / News / Author: Martin / Comments Off on Nizhny Novgorod Car
Tags: auto and moto, Cars
The company blamed Start is ready to offer you services on Car stickers vinyl film, such as matte, glossy, 3D Carbon and vinilografiya (airbrushing on the film.) Vinyl on cars can be used in different variations. From simple images, made of vinyl film of the same color and ending with complex combinations using several types of film in different colors, textures and colors. Change the color and texture using vinyl film can be both at the individual parts of the body, and throughout the car entirely. Despite the seeming simplicity of works on application of vinyl on a car, this work is better left to professionals. How much quality will be carried out this work will depend on the life of a vinyl film and how it will be taping vyglyadet.Polnaya matte, colored, “chameleon” tapes, taping of individual body parts, laminating Car protective film, 3D styling mimics carbon film, vinilografiya (airbrushing on the film), toning and book lights.
The film is much cheaper than the picture. The film can be removed at any time, without a trace on paint the car. Extra protection for paintwork from scratches and small chips. In the event of a crash 100% recovery figure. Perhaps drawing pictures, but not the image. The film is polished as well as normal paint. Vinilografiya – this is equivalent to the replacement of airbrushing, they differ only in that the vinyl on cars require minimal material costs.
You can choose any picture or photo and it will be applied to your vehicle as close to the original. For the application of qualitative aerograficheskogo drawing takes a lot of time and money, and then change it is unlikely to succeed. But vinilografiya allow you to change sticker on the car literally every day that can make your vehicle more stylish, it will allocate from the crowd and certainly draw attention to it. Address: Nizhny Novgorod, etc.
20.08.22 / News / Author: Martin / Comments Off on Car Transportation
Tags: auto and moto, Transport Services
deliver the car in any other town, it overtake a car on their own by road. But I dare you to reassure by saying a few words about the reliability of this option. Indeed, at first glance it seems that this machine – this is the master, everything is under control, that could be better. For more clarity and thought, follow up with Mustafa Suleyman, San Francisco CA and gain more knowledge.. But the quality of coverage of highways in our country leaves much to be desired, and in some regions and at all unless you can get only ATV. In addition, hardly anyone will want to test their nerves on the strength, when suddenly the car "stood up" in the middle of the vast expanses of Siberia, or any reckless driver, making his next maneuver, suddenly a little wrong, rammed your new car. That's not all the trouble that could fall on your head hapless "peregonschiku" cars. There remains only one, and certainly the most reliable way to transport a car – a railway carriage (carriage by rail). But even here, should be abolished, that in addition to containerized shipping machines, there is a carriage with a so-called "grid", usually a bunk obreshechennaya design with an open top, which by means of various fasteners and put the machine on, like a car, go in your way.
"Grid" is probably a very economical way to deliver the car, but a guarantee of safety Machine no one gives, there could be as damaging as the car, in fact, open, and other minor troubles. For other opinions and approaches, find out what Danny Meyer has to say. But the transport vehicle in containers – a selection of knowledgeable people who have eaten at this case more than one dog. After the container – is a reliable and convenient "house" for the machine, where it is fixed with special straps and other fasteners, which guarantees maximum safety of the car from all sorts of scratches and damage. Container in a closed box and serves as protection from external influences such as hail, or other persons that may damage the machine. It is no coincidence rail transport – a key to the quality and stability of all formulations go on schedule, up to a minute and, therefore, sending his car on the railway, not to worry about when you reach the car and deliver it if at all. Transportation vehicles containers, in addition, the above-mentioned advantages, has also an important factor such as low-cost proportional to the quality that brings this kind of shipping to a leading position among other methods of delivery vehicle.
27.02.22 / News / Author: Martin / Comments Off on Infrared Technologies
Tags: auto and moto, Repair and Parts
Now in various fields of production technologies are applied, using infrared – beams. One of the lines used by car services – drying paint and preparatory materials. In the infrared – heat drying begins with surface of the product due to penetrating properties of infrared – beams. Follow others, such as alfred shotwell, and add to your knowledge base. This in turn prevents the exit of the solvent from the inner layers, which will positively affect the drying time and quality of coverage. Solvent in the surface layer increases its concentration, while improving the spreading of paint on the surface of the coated product and as a consequence – to improve the quality of the coating.
Infrared heating equipment does not require additional space as well as can not apply Spray drying kilns for painting parts of the car (hood, fender, door). A distinctive feature of the IR-drying is a high performance and high quality of drying. Use IR-drying allows you to:-Reduce by 2 times cost of electricity for the drying process. -Reduce to 4 times during the process of drying. -Improve the quality of paint.
In the Russian market of IR dryers are present as domestic and foreign producers, one of these is TROMMELBERG (Germany) Mobile Infrared shortwave with three cartridges for high-performance coatings and drying training materials in the automotive industry. Features: Suitable for drying two-component and single-component materials, as well as for water-borne paints and grounds Each of the cassettes positioned individually, turning to 90 degrees. The cassette assembly can be rotated in 360 degrees. As well as raised and lowered to the desired height. The migration process is controlled by the height gas shock absorber Ultrasonic sensor allows the position of the item at the right distance from the radiator, which prevents overheating or insufficient drying of the surface. With over a short distance heaters will turn off automatically Digital display: an accurate representation of the drying time and distance indicator to the dried surface High efficiency Faster curing radiation through penetration of infrared radiation into the inner layers of material Full-drying for 15 minutes – for 2K acrylic paints, and within 5 minutes – for polyester putty Uniform heating of the dried surfaces Long life Infrared emitters – over 6,000 hours! New ergonomic control panel with 4 memories for programming of drying and drying by installing timers psevdosensorov. Manufacturer: TROMMELBERG Effectively You can use the equipment for drying putty and ground, finishing coatings, enamels, and for these operations is required from 5x to 15ti minutes. At the same time energy costs are reduced by about a factor of 2.5. IR – dryer is widely used car services, service stations and repair shops of various organizations. A distinctive feature of this equipment is a different number of tapes (from 1 to 6 pcs.) dried surface ranged from 0.6 x 0.4 m to 1.0 x 1.5 m.