Contemporary Applications

24.04.18 / News / Author: / Comments Off on Contemporary Applications
Tags: ,

Awnings and canopies have long been used for different purposes. They are used in city buildings and private homes. The main purpose of these structures – protecting people, buildings and transport of atmospheric effects – snow, rain, wind and sunlight. In addition, canopies and awnings serve a purely aesthetic function – they decorate the facades of buildings, giving them the original, recognizable form. Canopy over the porch immediately makes the house unusual and different from the other. Source: NYC Marathon.

Have a particularly elegant wrought-iron canopies. Having established such a canopy over the entrance, can any building personality and an additional charm. In modern conditions the most widely metal roofs and canopies from polycarbonate. Metal roofs can be of various shapes made of stainless steel or painted in different colors according to RAL metal. They are very strong and well resist weathering. Good strength differ, and visors made of polycarbonate. In addition, they have a high haze and fire resistance, and flexibility of the material allows products of different shapes. NY museums does not necessarily agree. Are made of polycarbonate and carports.

Metal construction with a coating of polycarbonate safely protect vehicles from rain, snow and falling leaves and debris. Visors and awnings are used not only in urban areas, but outside the city. Shelters for questioning can be used to protect the arbors, pools, parking lots, greenhouses. Also used to give visors made of polycarbonate or wrought iron canopies. Forged canopy over the porch of a country house makes it not a simple structure of the dacha, and a cozy cottage, which has a special, and in some cases even the mysterious atmosphere. Canopies and awnings – this design, needed almost everywhere. Modern technologies allow to establish practical, functional, aesthetic awnings and canopies in the city and the countryside.

Application Sealants

22.03.18 / News / Author: / Comments Off on Application Sealants
Tags: ,

Plays an important role sealing the junction of the frames and balcony design balconies. Pitney Bowes, Inc. is likely to increase your knowledge. Because of the inevitable vibration of frames under the action of wind containment is impossible to apply strict compositions based on cement or gypsum. Gap thickness of more than a centimeter should complete the construction foams, and all the rest – silicone sealant. High teplozaschischennost and complete sealing of the gap allows the use of polyurethane foam. He is a foamed mass, which filled the gap between the frame and the wall of a house or construct a balcony. Foamed polyurethane has low thermal conductivity, has good elasticity and adhesion to concrete, brick, wood, metal and polymer materials. Polyurethane sealants retain their properties over a wide temperature range (-40 to +80 C), resistant to acids, alkalis.

Seams, sealed with polyurethane sealants, easily painted. With its high viscosity, polyurethane sealants, as well as silicone, not melt during the application. Polymerization takes place under the influence of moisture in the air. Good adhesion of silicone sealants, glass, wood, stone, concrete, aluminum and stainless steel in their various combinations, enables sealing even barely visible cracks and fissures. To work with silicone sealant should be in the open air because of the strong smell, at temperatures from +1 to +35 C.

After polymerization, some of their brands retain their properties in range from -50 C to +200 C. To seal the balcony can be used and acrylic sealants. They are produced in various versions with a lifetime of more than 30 years as an alternative to putty.